Contact Closure Operation Type (#613) - Avaya PARTNER ACS Installation And Use Manual

5. Do one of the following:
To assign or unassign another extension to the same Contact Closure Group, press
I
n
or
To assign extensions to the other Contact Closure Group, press
I
P
6. Select another procedure, or exit programming mode.

Contact Closure Operation Type (#613)

Use this feature to specify how long the Contact Closures remain active when they are activated.
A Contact Closure can be activated for 1, 3, or 5 seconds; or the Contact Closure can be set to
toggle.
For example, if a Contact Closure that controls a door lock has a Contact Closure Operation Type
of "5-Seconds On," the door lock is released for 5 seconds when a user activates the Contact
Closure. If the Contact Closure has a Contact Closure Operation Type of "Toggle," the Contact
Closure must be activated and deactivated. One user can activate the Contact Closure and
another user can deactivate it (provided both users are included in the Contact Closure Group for
that Contact Closure), or the same user can both activate and deactivate the Contact Closure.
Programming
To specify the Operation Type for a Contact Closure:
1. Press f00ss#613
2. At the Contact Number: prompt, enter the number (1 or 2) for the Contact Closure.
The display shows the current setting for that Contact Closure.
D
3. Press
the default setting:
1 = 1-Second On
I
2 = 3-Seconds On (the factory setting) ✔
I
3 = 5-Seconds On
I
4 = Toggle
I
4. To assign the Operation Type for the other Contact Closure, press
repeat Step 3.
5. Select another procedure, or exit programming mode.
p
until the correct extension appears. Then repeat Step 4.
, and begin at Step 2.
d
or until the appropriate value appears, or press
Using Auxiliary Equipment
N
at extension 10 or 11.
r
n
or
Contact Closure Adjunct
or
to return to
p
, and
9-11