Avaya PARTNER ACS Installation And Use Manual page 58

®
PARTNER Advanced Communications System Installation, Programming, and Use
Wall-Mounting
Follow these steps to wall-mount a PARTNER telephone:
1. Reverse the plastic hook that sits in the
earpiece part of the handset cradle
(see Figure 2-29).
2. Turn the telephone upside down. If you have a
tray on the bottom of your telephone, remove
the tray that holds the User Instruction cards by
pressing the tabs on both sides of the tray near
the pull-out tab while sliding the tray straight
out.
3. Holding the stand with the wide edge down,
mount the stand on the wallplate by using the
keyholes on the base of the stand
(see Figure 2-30).
Installing Telephones
2-30
Figure 2-29. Reversing the Plastic
Hook
Figure 2-30. Mounting the Stand on
the Wallplate