Avaya PARTNER ACS Installation And Use Manual page 107

The entries you must make to permit or restrict toll calls differ depending on the setting for Toll
I
Call Prefix (#402).
If Star Code Dial Delay (#410) is active, after a valid star code is dialed, the system resets the
I
dialing restrictions to check the number beginning with the first digit after the star code.
If you want to go to another programming procedure when entering telephone numbers in a
I
list, you must press
considered part of the telephone number.
Programming
To create a list of Disallowed Phone Numbers:
f00ss#404
1. Press
2. At the List Number : prompt, enter a list number (1—8).
3. At the Entry : prompt, select a list entry (01—10).
4. At the Data - - - - - - - - - - - - prompt, enter the first telephone number.
5. To save the telephone number in memory, press
6. Do one of the following:
To add other telephone numbers to this list, press
I
and repeat Steps 4 and 5.
To change the telephone number you just entered, press
I
and 5.
To delete the telephone number you just entered, press
I
To create another list, press
I
7. Select another procedure, or exit programming mode.
N P
+
N
Programming System Options
#
, since entering and a three-digit code is
at extension 10 or 11.
e
.
n to select a different list entry
r
r .
P
+ and repeat from Step 2.
Dialing Restrictions and Permissions
and repeat Steps 4
4-21