Avaya PARTNER ACS Installation And Use Manual page 220

®
PARTNER Advanced Communications System Installation, Programming, and Use
4. Press the programmed Account Code Entry button or press
of the code.
If the Account Code Entry button has lights, the green light turns off.
5. Make the call, if you are not already on a call.
6. To change the account code, repeat Steps 2 through 4.
To enter or change a forced account code:
1. From a system telephone, if a password is programmed for the system, enter it before lifting
the handset.
2. Lift the handset or press
3. Press the programmed Account Code Entry button or press
If the Account Code Entry button has lights, the green light turns on.
4. Enter an account code (supplied by your System Manager) by doing one of the following:
Dial the account code manually by using the telephone's dialpad.
I
Dial a System or Personal Speed Dial number programmed with the account code.
I
Press an Auto Dial button programmed with the account code.
I
5. Press an idle line or pool button:
If a Forced Account Code List exists and the account code is valid (or if the Forced
I
Account Code List is empty), you hear outside dial tone. Go to Step 6.
If a Forced Account Code List exists and the account code is not valid, you are denied
I
access to the outside line. Verify the account code with your System Manager, then repeat
this procedure, starting from Step 1.
6. Make the telephone call.
7. To change the account code while on a call:
a. Press the programmed Account Code Entry button, or press
b. Enter a different account code.
c. Press the programmed Account Code Entry button, or press
If a Forced Account Code List exists and the account code is invalid, you hear a denial
tone. Verify the account code, then repeat Step 7, making sure to enter a valid account
code.
Account Code Entry (F12)
8-4
S .
f12 to indicate the end
f12
.
f12 .
f12
.