Contact Closure (F41 And F42); Using Conference Drop On A System Telephone; Using Conference Drop On A Single-Line Telephone - Avaya PARTNER ACS Installation And Use Manual

Programming
To program a Conference Drop button:
f00
1. Press
2. Press a programmable button.
3. Press f06
4. Program another button for this extension, or exit programming mode.

Using Conference Drop on a System Telephone

Press the programmed button or
conference.

Using Conference Drop on a Single-Line Telephone

Press the switchhook down once rapidly. The last-added party (inside or outside) is dropped from
the conference.

Contact Closure (F41 and F42)

The system can drive an optional Contact Closure Adjunct with two Contact Closures to
operate auxiliary devices such as electronic door locks. If the System Administrator has assigned
your extension to a Contact Closure Group for one or both of these Contact Closures, you can
activate the Contact Closure from your telephone. This way you can open an electric door lock or
activate other electronic devices by entering the feature code or pressing the programmed
Contact Closure button.
Considerations
f41
Program
I
of the Contact Closures. The button's green light lights when the Contact Closure is
activated by you, and the red light lights when the Contact Closure is activated by another
user in that Contact Closure Group. The light turns off when the Contact Closure is
deactivated.
Before you can activate a Contact Closure, your extension must be assigned to the Contact
I
Closure Group for that Contact Closure.
.
.
f06
f42
and/or
Programming & Using Telephone Features
. The last-added outside party is dropped from the
on buttons with lights so you can monitor the status

Contact Closure (F41 and F42)

8-27