Avaya PARTNER ACS Installation And Use Manual page 104

®
PARTNER Advanced Communications System Installation, Programming, and Use
Considerations
For specific telephone numbers, enter the number exactly as you would dial it. To restrict
I
dialing numbers in an entire area code, enter that area code exactly as you would dial it (for
example, "800" or "1800").
After programming the Allowed Phone Number Lists, you must use Allowed List
I
Assignments (#408) to assign the lists to specific extensions.
Allowed Phone Number Lists override Disallowed Phone Number Lists (#404) and
I
Outgoing Call Restriction (#401), but not Line Access Restriction (#302), Pool Access
Restriction (#315), or Night Service Button (#503) with a System Password (#403).
The entries you must make to permit or restrict long-distance calls differ depending on the
I
setting for Toll Call Prefix (#402). This setting tells the system whether a "0" (for operator-
assisted calls) or a "1" (for direct-dial calls) is required when users make long-distance calls.
If Star Code Dial Delay (#410) is active, after a valid star code is dialed, the system resets the
I
dialing restrictions to check the number beginning with the first digit after the star code.
If you want to go to another programming procedure when entering telephone numbers in a
I
list, you must press
considered part of the telephone number.
SECURITY ALERT:
If you are restricting an extension from placing long-distance calls, do not place numbers
beginning with a "0" on an Allowed Phone Number List for the extension. Once a user is
active on an operator-assisted call, the user can avoid dialing restrictions by asking the
operator to dial restricted numbers.
Programming
To create a list of Allowed Phone Numbers:
f00ss#407
1. Press
2. At the List Number : prompt, enter a list number (1—8).
3. At the Entry : prompt, select a list entry (01—10).
4. At the Data- - - - - - - - - - - - prompt, enter the first telephone number.
5. To save the telephone number in memory, press
6. Do one of the following:
To change the telephone number you just entered, press
I
and 5.
To delete the telephone number you just entered, press
I
To add other telephone numbers to this list, press
I
To create another list, press
I
7. Select another procedure by using
Dialing Restrictions and Permissions
4-18
N P
+
N
N
#
, since entering and a three-digit code is
at extension 10 or 11.
e
.
r
r
.
n
and repeat Steps 4 and 5.
+ P and go to Step 2.
P
+ , or exit programming mode.
and repeat Steps 4