Video Conferencing Data Stations - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Connecting Data Equipment

Video Conferencing Data Stations

Video Conferencing Data Stations
You can use the terminal adapter with a Multipurpose Enhancement Board for
synchronous data communication. This type of station allows data transmission
at speeds of 56 or 64 kbps.
This section is only a guideline for connecting video conferencing equipment to
the system. For additional information, refer to the documentation packaged
with the video codec.
Also, for instructions on using the Multipurpose Enhancement Board or for
additional information on setting up the terminal adapter, see the documentation
packaged with the terminal adapter.
You need the following hardware:
008 MLX module or 408 GS/LS-MLX module and a 100D module in the
control unit
ACCULINK 3150 CSU
Two terminal adapters:
— Two 7500B data modules with two 7500B data module feature
— Two ExpressRoute terminal adapters
Two Multipurpose Enhancement Boards [install one of these in each
terminal adapter for synchronous communication and an RS-366
Automatic Calling Unit (ACU) interface]
Two WP901 10-L7 power supplies (one per stand-alone terminal
adapter)
Two 440A4 terminating resisting adapters
Z77A multiple mounting (mounting for multiple 7500B data modules)
PictureTel video codec unit
package 2 upgrades (user manuals included)
Issue 1
June 1997
Page 6-17