Upgrading To Release 4.2; Upgrading To Release 4.1 - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Upgrading the System

Upgrading to Release 4.2

Both of the following:
— Release 3.0 or later processor module that is flash card capable
— A forced installation PCMCIA memory card with Release 4.0
DOS-formatted diskette
Upgrading to Release 4.2
You must have DOS SPM Version 5.15 to upgrade to Release 4.2 from
Releases 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, or 4.0.
To upgrade to Release 4.2, you need:
SPM Version 5.15 or later to back up and convert system programming
information and to restore system programming information after the
Release 4.0 processor module has been installed.
Both of the following:
— Release 3.0 or later processor module that is flash-card capable
— A forced installation PCMCIA memory card with Release 4.0
DOS-formatted diskette

Upgrading to Release 4.1

You must have DOS SPM Version 5.15 to upgrade to Release 4.1 from
Releases 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, or 4.0.
To upgrade to Release 4.1, you need:
(when converting from Release 2.1 or earlier).
system software (when converting from any release).
(when converting from Release 2.1 or earlier).
system software (when converting from any release).
Issue 1
June 1997
Page 9-2