Dial Dictation Devices - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing Telephones and Adjuncts
Installing Adjuncts
Plug the cord from the adjunct into the TEL EQUIP jack on the GPA.

Slide the switch on the back of the GPA to the setting that provides

the required service.
Basic. This setting is used to dial and answer calls from an analog
multiline telephone or to attach a T/R adjunct such as a single-line
telephone or answering machine. Incoming calls ring only on the analog
multiline telephone. This setting also allows the user to originate and
receive calls on the telephone while using a computer with a modem
attached to the GPA. However, if this setting is used, data calls cannot
be answered automatically.
Join. This setting is used to add a recording device or a single-line
telephone to a call that is in progress on the telephone. You cannot
originate or answer calls on this setting.
Automatic. Use this setting when a GPA connects a modem to an
analog multiline telephone for answering calls or answering machine.

Dial Dictation Devices

You can connect a dial dictation device to one of the following, as described
earlier in this chapter:
012 module
016 module
MLX telephone with an MFM
GPA and analog multiline telephone
You can also connect a dial dictation device through a commercially available
trunk adapter or a Universal Paging Access Module (UPAM) on a loop-start
line/trunk jack with an external power supply unit.
NOTE:
Using any of the devices listed above, you cannot connect dial dictation
devices that require contact closure. You can, however , connect such
Issue 1
June 1997
Page 3-25