Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual page 149

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing Telephones and Adjuncts
Assembling MLX Telephones
Figure 3-36. Replacing the Extension Label
Replace the extension label and plastic cover.

a. Insert one end into the slot and snap the other end into place. See
b. If you are mounting an MLX-10, MLX-10D, or MLX-10DP wall
Wall mounting an MLX-10, MLX-10DP, or MLX-10D telephone.

a. Turn over the telephone and remove the jack guard from the
b. Unpack the 630B Phonemount and remove the modular jack from
c. Route the D8W cord (or DIW cable) through the hole in the
MLX-10
555-1234
Figure 3-36.
telephone, go to Step 7. If you are assembling a desk telephone,
go to Step 8.
TEL/OTHER jack area; set the telephone aside.
the backplate.
backplate and have it exit at the top of the backplate; leave 10 in.
(25 cm) of cord to connect the telephone. See
MLX-10
ABC DEF
Volume
1
2 3
Feature Transfer GHI JKL MNO
4 5 6
HFAI Conf
PQRS TUV WXYZ
7 9
8
Mute Drop
Oper
#
*
0
Speaker Hold
Figure
Issue 1
June 1997
Page 3-54
3-37.