Hardware Requirements; Merlin Mail - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing Applications

MERLIN MAIL

Hardware Requirements

Lucent Technologies Attendant requires connection to an 012 or 016 basic
telephone module. You can use up to eight jacks on an 012 basic telephone
module or up to 16 jacks on an 016 basic telephone module for Lucent
Technologies Attendants.
If you use all eight jacks on an 012 module for Lucent Technologies Attendant,
you cannot connect any other devices to the module. When using fewer than
eight jacks on the 012 module, you can use the remaining jacks for tip/ring
devices.
The following hardware is also required:
Lucent Technologies Attendant unit and cords
Some AC power strips may be needed, since the Attendant is powered
by wall-mounted transformers (10 V AC).
Powering and grounding procedures must follow those established for
T/R telephones that require auxiliary power.
For more information, consult Lucent Technologies Attendant Installer's Guide.
MERLIN MAIL
MERLIN MAIL Voice Messaging System provides the following integrated call
management services:
Automated Attendant
Call answering
Voice mail
Security Alert:
Products that are connected through a voice port must be properly
restricted to prevent toll fraud. See Appendix A in Maintenance and
Troubleshooting for more information.
Issue 1
June 1997
Page 8-18