Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual page 294

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Upgrading the System
Modifying the Processor for Key Mode
Figure 9-6. Removing the Processor Module Circuit Board
Holding the processor circuit board at each end, lift it up and turn it

over and away from you. See
Place the processor circuit board on a flat, non-metallic surface.

Carefully support the dip switch assembly with your index finger,

while moving the switch to the closed position. See
Replace the processor circuit board face (components) down into

the module housing.
Replace the processor module side panel and clip into place.

Replace the processor module into the carrier. See

Power up the system.

Lift Circuit board
Up and Over
PROCESSOR MODULE
Figure
Processor
9-6.
Figure
Figure
Issue 1
June 1997
Page 9-17
9-7.
9-4.