Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual page 72

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing the Control Unit
Installing the Power Supply
Figure 2-6. Installing a Copper Shield in the Power Supply
Tuck the foil shield tightly along the ledge (or crease) of the

housing and work out any air bubbles as you press the foil firmly in
place.
With the copper-foil shield in place, put the power unit information

label on the lower piece of foil.
Attach the UL or CSA label on the power supply below the

copper-foil shield.
CAUTION
TURN OFF
POWER BEFORE
INSERTING OR
REMOVING
MODULES
Upper Copper
Foil Shield
Lower Copper
Foil Shield
Power Unit
Information
Label
UL Label
or
CSA Label
Issue 1
June 1997
Page 2-23