Supplemental Alerts - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing Telephones and Adjuncts
Installing Adjuncts

Supplemental Alerts

Alerting devices notify people working in noisy areas of outside, transferred, and
intercom calls. Connect an alert to one of the following:
Single-line telephone
MLX telephone with an MFM
Supplemental Alert Adapter (SAA) and analog multiline telephone
Alerts compatible with the SAA include horns, bells, chimes, and strobes. See
''Supplemental Alert Adapter''
NOTE:
The MFM in SAA mode and SAA support devices operate on 48 V DC.
You can connect alerts operating on 20 through 30 Hz to either an MFM in
tip/ring mode or a single-line telephone jack.
Supplemental Alert Adapter
If the system forms indicate a bell, horn, chime, or strobe with an analog
multiline telephone, follow the steps below to install an SAA. See
Plug the telephone cord into the TELEPHONE jack on the SAA.

Plug the cord from the alert device into the ALERTER jack on the

SAA.
Plug the cord from the telephone wall jack into the CONTROL UNIT

jack on the SAA.
for installation instructions.
Issue 1
June 1997
Page 3-38
Figure 3-27.