MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Upgrading the System
Upgrading the Control Unit
2
Figure 9-4. Replacing a Module in the Carrier
Remove the clips from the left side of the control unit as you did in
Step 1; however, make sure you replace the clips before securing
the screws again.
Reinstall the power supply module by hooking it onto the rod at the
top of the carrier and then swinging it down into place. See
Figure
Push the power supply module firmly until you hear it lock.
1
3
9-4.
Issue 1
June 1997
Page 9-14