Installing The Control Unit; Overview - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0 MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140 Installation

Installing the Control Unit

Overview

Installing the Control Unit
2
If you have not read
chapter.
Overview
Installing the control unit involves the following procedures:
Preparation requirements
Installing the backboard
Meeting the power and grounding requirements
Checking the total unit load
Installing the basic carrier
Installing any expansion carriers
Installing the power supply
Installing the processor
Installing the line/trunk and extension modules
Connecting the control unit to AC power
Powering up the system
Powering down the system
The following sections provide detailed instructions for these installation
procedures. Follow the procedures in the order in which they are presented.
Chapter 1, ''Introduction'', do so before continuing with this
Issue 1 Issue 1
June 1997 June 1997
Page 2-1
2