Testing The Dss; Testing Night Service - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Initializing and Testing the System
Testing the System
Pick up the handset at the covering telephone and verify that you

have good two-way communication.
Hang up the handset at the covering telephone.

Check both Individual and Group Coverage.


Testing the DSS

At each Direct Station Selector (DSS), check that all lights are operational. Then
use the DSS to call a telephone in the system. Test the Page buttons on the
DSS.

Testing Night Service

To test the Night Service feature on the system operator console, follow the
steps below:
At the system operator console, press the Night Service button.

If Night Service with Outward Restriction is programmed, you must also
enter the password. (You can also activate Night Service on a DLC by
pressing the Feature button and dialing
The Night Service LED turns on.
Pick up the handset and press a button for an outside trunk.

Dial the outside number that reaches an operator console that is

programmed to receive Night Service coverage.
Verify that the telephones assigned to the Night Service group are

ringing.
Have someone pick up the handset at a telephone in the Night

Service group.
Verify that you have good two-way communication.
At both telephones, hang up.

Repeat Steps 2 through 6 for each operator console that is

programmed to receive Night Service coverage.
.)
39
Issue 1
June 1997
Page 7-15