Merlin Identifier; Modems - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing Telephones and Adjuncts
Installing Adjuncts

MERLIN Identifier

MERLIN Identifier allows the use of local telephone company caller
identification services to receive, store, and use calling party number
information. Before installation, verify that this service provided by the Central
Office is available on the lines to be connected. Each MERLIN Identifier
consists of the following:
A control unit, which must be located near the MERLIN LEGEND control
unit
Up to four individual display units, which can be mounted on analog
multiline telephones or wall-mounted for both analog and MLX
telephones
An administrative keyboard
Optional equipment includes an administrative display, a PC, and a serial
printer.
For detailed instructions, see MERLIN Identifier Installation and Administration.
When MERLIN Identifier is used with MLX telephones, a pair of installer-wired
104A termination outlets is required for each MLX set that is connected to a
MERLIN Identifier display unit.

Modems

You can connect a modem to one of the following:
Single-line telephone
MLX telephone with an MFM
GPA and analog multiline telephone
Issue 1
June 1997
Page 3-34