Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual page 151

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing Telephones and Adjuncts
Assembling MLX Telephones
Figure 3-38. Routing the Cord Through the Backplate
f. Plug the free end of the cord into the LINE jack on the back of the
g. Position the telephone on the mounting plate studs and then slide
Label the button assignment card.

a. Pull the tab at the top of the plastic cover toward you.
D8W
telephone. Route the cord through the cord channel above the
jack. See Figure 3-38.
the telephone down to lock it in place. To remove the telephone,
slide it up and off.
Mounting
Plate
630B
Issue 1
June 1997
Page 3-56