MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing Telephones and Adjuncts
Assembling MLX Telephones
Figure 3-30. Adjusting or Removing the Deskstand
To assemble an MLX telephone, follow the steps below.
Remove or adjust the deskstand. See
a. Place the telephone face down on a flat surface.
b. Press on the top rear center of the deskstand to release the tab,
c. Insert the tab into the slot in the module cover to adjust the height.
d. To remove the deskstand, continue to pull it up and away from the
e. Release the deskstand from the front slot.
Press
Center Tab
If you want to leave the deskstand in the low position, go to
Step 2.
If you want to adjust the angle of the deskstand, or remove it in
order to wall-mount the telephone:
then pull it up towards you.
telephone.
Pull Up
and
Away
Figure
Issue 1
June 1997
Page 3-49
3-30.