Considerations; Hardware Requirements - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing Applications
PassageWay Direct Connect Solution
Lucent Technologies Buzz. An application that enables users to
manage incoming calls (answer, hold, or drop) and view the calling party
number (Caller ID) for each incoming call at their telephones.

Considerations

MERLIN LEGEND Communications System Release 3.0 or later is required for
caller identification display capabilities.
Local telephone power is required if the MLX telephone is not wired with
4-pair extension wiring or if you use a MLX-20L or MLX-28D with a Direct
Station Selector (DSS).
The MLX telephone must have Idle Line Preference activated.
The Automatic Line Selection on the MLX telephone should be programmed so
that Idle Line Preference is on an ICOM button (in Key and Behind Switch
modes) or an SA button (Hybrid/PBX mode).

Hardware Requirements

The following hardware is required:
An approved DOS PC with the following
— An 80286 or higher processor (80386 or higher recommended)
— An available serial port
— A minimum of 2 MB of RAM
— A 3.5-inch, 1.44-MB, high-density drive or a 5.25-inch, 1.2-MB,
— A hard disk drive with 2 MB of space available
— A Windows-compatible color video monitor
high-density drive
Issue 1
June 1997
Page 8-24