Rj21X Interface - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Connecting the Control Unit to the Network Interface
Wiring
When constructing wiring fields between the network interface and the control
unit, you must order hardware as individual parts. Do not use Interconnect
Wiring or Systimax wiring kits.

RJ21X Interface

The RJ21X network interface has a female 50-pin (25-pair) amphenol
connector, as shown in
To connect the RJ21X interface to the control unit, you must build a wiring field
between the RJ21X interface and the control unit using a 66-type block (RJ21).
This field converts the female amphenol connector to sets of four
1-pair modular jacks.
Figure 4-1.
Issue 1
June 1997
Page 4-4