Testing Music On Hold - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Initializing and Testing the System
Testing the System
Pick up the handset at the test telephone and dial the number for a

particular zone.
If ZoneMate 9 paging equipment is in use with PagePac 20, get an
acknowledge tone first and then dial the zone code to make an
announcement. You may hear a confirmation tone.
Make an announcement into the handset.

You should hear the announcement over the loudspeaker(s).
Hang up.

Repeat Steps 1 through 3 for all paging zones.


Testing Music On Hold

To verify that music is provided to outside callers placed on hold, follow the
steps below. Inside callers do not hear Music On Hold.
Pick up the handset at the test telephone.

Dial the central office trunk access code and the system's

published directory number; or, if you are using a DID trunk, dial
any extension.
At the destination extension, answer the incoming call.

At the destination extension, press the Hold button.

The line button's green LED should flash.
Verify that music is heard at the destination extension and adjust

the volume as required.
Hang up.

NOTE:
If the customer uses equipment that rebroadcasts music or other
copyrighted materials, the customer may be required to obtain a copyright
license from and pay license fees to a third party such as the American
Society of Composers, Artists, and Producers (ASCAP) or Broadcast
Music Incorporated (BMI). Or the customer can purchase a Magic-on-Hold
system, which does not require that you obtain such a license, from
Lucent Technologies.
Issue 1
June 1997
Page 7-17