Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual page 197

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing the PC, CAT, or Printer
Connecting a Printer to the Control Unit
Figure 5-7. Connecting the 248B Adapter and the 2012D Transformer
Plug the other end of the D6AP cord into the 2012D-50M

transformer.
If you are working with a 248B adapter and 2012D transformer instead of
a 2012D-50M transformer, plug the D6AP cord into the jack on the 248B
adapter, and then connect the spade-tip wires on the 248B adapter to the
screws on a 2012D transformer. See
Plug the 400B2 adapter into a wall jack, BR1 A-4P adapter, 102

connecting block, or 103 connecting block.
Complete the 400B2 connection.

248B Adapter
D6AP Cord
2012D Transformer
Transformer
with 248B Adapter
Figure 5-7.
Issue 1
June 1997
Page 5-20