Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual page 185

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing the PC, CAT, or Printer
Connecting a Printer to the Control Unit
Lucent Technologies Call Accounting Terminal (CAT) Printer
Lucent Technologies Call Accounting System Printer
Lucent Technologies Applications Printer
NOTE:
The Lucent Technologies 570 printer is not compatible with the system.
Printer connection varies depending on the printer model, whether the printer is
grounded on the same AC outlet as the control unit, and whether the printer is
within 50 ft. (15.2 m) of the control unit. The procedures covered in this chapter
are described below:
If the CAT serial printer is used with a CAT and is grounded to the same
AC outlet as the control unit and is within 50 ft. (15.2 m) of the control
unit, refer to
If the CAT serial printer is used with a CAT and is either not grounded to
the same AC outlet as the control unit or is more than 50 ft. (15.2 m) from
the control unit, refer to
Outlet''.
If the SMDR or CAT printer is within 50 ft. (15.2 m) of the control unit and
is connected to the same 117-V AC branch as the control unit, refer to
''Connecting a Printer Within 50 Feet (15.2
If the SMDR or CAT printer is more than 50 ft. (15.2 m) from the control
unit and is not connected to the same 117-V AC branch as the control
unit, refer to
!
CAUTION:
Before touching leads, connectors, pins, and other components,
wear a properly grounded wrist strap, to prevent damage from
electrostatic discharge (ESD).
''Connecting a CAT and Printer on the Same AC
''Connecting a CAT and Printer on a Different AC
''Connecting a Printer 50 Feet (15.2 m) or More
m)''.
Away''.
Issue 1
June 1997
Page 5-8
Outlet''.