Installing The Pc, Cat, Or Printer; Connecting A Pc To The Control Unit - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0 MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140 Installation

Installing the PC, CAT, or Printer

Connecting a PC to the Control Unit

Installing the PC, CAT, or Printer
5
Once you complete the installation procedures presented in the previous
chapters, you can connect a Station Message Detail Recording (SMDR) or Call
Accounting Terminal (CAT) printer and a personal computer (PC), or a CAT and
CAT printer, to the system.
Connecting a PC to the Control Unit
You can use a PC with MS-DOS 3.3 or higher and SPM 4.15 for SMDR, system
programming, or maintenance. The method you use to connect the PC to the
control unit depends on the distance between the hardware:
If the PC is within 50 ft. (15.2 m) of the control unit, see
PC Within 50 Feet''
If the PC is more than 50 ft. (15.2 m) from the control unit, see
''Connecting a PC More Than 50 Feet (15.2 m) Away''
chapter.
!
CAUTION:
To prevent damage from electrostatic discharge (ESD), avoid
touching leads, connectors, pins, and other components. Use a
properly grounded wrist strap.
on the following page.
Issue 1
June 1997
Page 5-1
5
''Connecting a
later on this
Issue 1
June 1997