Testing The Dictation System; Testing The Paging System - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Initializing and Testing the System
Testing the System
Test telephones that are programmed for Night Service with

Outward Restriction.
a. Pick up a handset on a restricted telephone and verify that outside
b. Using the password, make an outside call.
c. Hang up the handset.
d. Press the Recall button and dial the password. (On an MLX
e. Pick up the handset and make an outside call.
f. Verify that you have good two-way communication and hang up.
At the operator console, press the Night Service button again. If you

used a password in Step 1, enter the password again. Verify that the
Night Service LED turns off.

Testing the Dictation System

If dictation equipment has not been installed, skip this test. Place a call to verify
that you can access the dictation system.
To access the dictation system, follow the steps below:
At the test telephone, pick up the handset.

Dial the access code and the number associated with the dictation

equipment.
Verify that the ready tone is transmitted.

Test the transmission in both directions; make a recording and play

it back.
Hang up.


Testing the Paging System

To test the paging system, follow the steps below:
calls are not allowed.
telephone without a programmed Recall button, press the Feature
button and dial
775
handset.)
and the password before picking up the
Issue 1
June 1997
Page 7-16