Unit Load Worksheet - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Unit Load Calculation Worksheet

Unit Load Worksheet

Unit Load Worksheet
1. Number of modules in carrier (excluding power
supply and processor:
If fewer than five, power is adequate.
If five or six, continue to Step 2.
2. Key or Behind Switch mode only:
Indicate configuration of lines; then go to Step 5.
3. Hybrid/PBX mode only:
Do all modules in the carrier have MLX and/or
analog multiline telephone jacks?
If no, a newer power supply is not needed.
If yes, continue to Step 4.
4. Hybrid/PBX mode only:
Calculate the total number of MLX and analog
multiline telephones:
Number of MLX-20L consoles connected to modules
in the carrier
Number of MLX-28D consoles connected to modules
in the carrier
Number of 34-button analog multiline telephones
connected to modules in the carrier
Total of MLX-20L, MLX-28D, and 34-button analog telephones
If total is less than or equal to 45, auxiliary power is
not required.
If the total is greater than 45, continue to Step 5.
Issue 1
June 1997
Page B-2
__________
o
Square
o
Modified
o
Yes
o
No
__________
__________
__________
__________