Rj11 And Rj14 Interfaces - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Connecting the Control Unit to the Network Interface
Wiring

RJ11 and RJ14 Interfaces

RJ11 and RJ14 interfaces are connected to the control unit similarly. However,
note the following differences:
RJ11 connects one central office trunk per jack.
RJ14 connects two trunks per jack.
Plug a 267C-type adapter into each RJ14 jack. You need D2R cords for RJ11
jacks. See Figure
Single-Line Adapter (RJ11)
2-Line Adapter (RJ14)
Figure 4-5. RJ11 and RJ14 Interfaces
4-5.
(267C)
Issue 1
June 1997
Page 4-10