Installing Cordless Or Cordless/Wireless Telephones; Mdc 9000 Cordless Telephone; Mdw 9000 Cordless/Wireless Telephones - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing Telephones and Adjuncts

Installing Cordless or Cordless/Wireless Telephones

b. Type or write the button assignments on the card.
c. Insert the card and replace the plastic cover. Be sure the textured
Adjust the contrast on the telephone's display.

Installing Cordless or
Cordless/Wireless Telephones
The sections below describe the ways you can connect MDC 9000 cordless or
MDW 9000 cordless and wireless telephones to the system.

MDC 9000 Cordless Telephone

You can connect the base unit of the MDC 9000 to an analog extension jack.

MDW 9000 Cordless/Wireless Telephones

The following is a brief overview of procedures and considerations for
installation of the MDW 9000 telephone. For more detailed information, see the
installation guide that comes with the telephone .
If possible, place the radio module of a wireless telephone in the same
room and on the same wall as the MERLIN LEGEND Communications
System control unit.
A minimum distance of 3 ft. is required between the radio base and the
control unit. The radio module must be within 24 ft. of a properly
grounded 3-prong AC outlet that is not controlled by a wall switch and
connects to the control unit through an analog multiline jack with a line
connector.
side of the cover is facing you.
For an MLX-20L telephone, slide the lever on the top of the
telephone.
For an MLX-10D, MLX 10DP, or MLX-28D telephone, press the
Menu button and select
#NTRST
; follow the display prompts.
Issue 1
June 1997
Page 3-57