Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual page 193

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Installing the PC, CAT, or Printer
Connecting a Printer to the Control Unit
Figure 5-5. Connecting a Printer Within 50 ft. (15.2 m)
To connect a printer within 50 ft. (15.2 m), follow the steps below. Refer to
Figure 5-5.
Plug the short end of a Z200A EMI cord into the SMDR jack on the

control unit.
Plug the other end of the Z200A EMI cord into a 355AF or 355A

adapter.
Plug the female end of the adapter into either the 25-pin male

connector on the printer's interface cable or the serial port on the
printer.
Set the appropriate printer options for SMDR.

See ''Setting Printer Options and DIP Switches''
Processor Module
SMDR
Jack
Z200A
EMI
Tu rn
pow off
er bef
ins ert ore
rem ing
ovi ng or
mo dul
Filter es
AG INPUT
355AF
Adapter
Control Unit
EIA-232-D
SMDR Printer
for instructions.
Issue 1
June 1997
Page 5-16