Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 789

Table 4-1
Command
secTempPasswdSet
secVersionReset
snmpConfig
tsClockServer
wwn
zoneAdd
zoneCreate
zoneDelete
zoneObjectCopy
zoneObjectExpunge
zoneObjectRename
zoneRemove
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Commands Exclusive to the Primary FCS (Continued)
Notes
Must be run from the primary FCS switch.
Must be run from the primary FCS switch. Can also be run on a single
non-FCS switch which is segmented from a fabric.
Community strings can be changed on the primary FCS switch only
Can be run on all switches to view the NTP server's IP address. You can only
modify the NTP server's IP address on the primary FCS switch.
This command can be run on all switches to view the WWN. With security
enabled the WWN of a switch cannot be modified.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
4
4-3