Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 710

Note: Enter commands in lowercase only; mixed case is for readability.
2
switchShow
If a port is configured as a long distance port, the long distance level is displayed in the format of Lx,
where x represents the long distance level number. Refer to
Note
The port state for disabled E_Ports display as In_Sync when the port is the interswitch link (ISL) between
a SilkWorm 48000 and a SilkWorm 24000. If the ISL is between a SilkWorm 48000 and a SilkWorm
4100 or 200E, the disabled E_Port displays as No_Sync.
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands The operand is as follows:
-portcount
-iscsi
associated with GbE ports in a switch.
Examples To display the port count:
switch:admin> switchshow -portcount
ports= 64
To display the port status for an E_Port:
san116:user> switchshow
10:00:00:60:69:00:02:1c"san130"
10:00:00:60:69:00:02:1c"san130"
10:00:00:60:69:00:02:1c"san130"
10:00:00:60:69:00:02:1c"san130"
10:00:00:60:69:00:02:1c"san130"
10:00:00:60:69:00:02:1c"san130"
10:00:00:60:69:00:02:1c"san130"
10:00:00:60:69:00:02:1c"san130"
(output truncated)
2-676
Displays the number of ports on the switch.
Causes the switchShow
switchName: san116
switchType: 10.1
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 2
switchId: fffc02
switchWwn: 10:00:00:60:69:00:02:48
switchBeacon: OFF
blade1: Beacon: OFF
blade4: Beacon: OFF
Area Slot Port
-------------------------------------------------
0 1 0
1 1 1
2 1 2
3 1 3
4 1 4
5 1 5
6 1 6
7 1 7
portCfgLongDistance
command to display the number of iSCSI sessions
Media Speed State
id N2 Online
id N2 Online
id N2 Online
id N2 Online
id N2 Online
id N2 Online
id N2 Online
id N2 Online
for more information.
E-Port
E-Port
E-Port
E-Port
E-Port
E-Port
E-Port
E-Port
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01