Note: Enter commands in lowercase only; mixed case is for readability.
2
interopMode
Examples
To enable interoperability mode:
switch:admin> interopmode 1
Please make sure the MS Platform service is disabled.
Please run "msPlMgmtDeactivate" command to disable the Platform service.
The switch effective configuration will be lost when the operating mode
is changed; do you want to continue? (yes, y, no, n): [no] y
Interopmode is enabled.
Note: You MUST reboot this switch for the new change to take effect.
To disable interoperability mode:
switch:admin> interopmode 0
The switch effective configuration will be lost when the operating mode
is changed; do you want to continue? (yes, y, no, n): [no] y
Interopmode is disabled.
Note: You MUST reboot this switch for the new change to take effect.
To see connections on a switch that is operating in interop mode (ports 8/0, 8/1 show the connections to
2-290
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01