Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 694

Note: Enter commands in lowercase only; mixed case is for readability.
2
supportShow
Operands
This command has the following operands:
slotnumber/portnumber1-portnumber2
lines
Examples
To display switch information for debugging:
switch:admin> supportshow 1/1-3
supportshow groups enabled: system
version:
Kernel:
Fabric OS:
Made on:
Flash:
BootProm:
uptime:
10:49am
switchshow:
switchName:
switchType:
switchState:
switchMode:
switchRole:
switchDomain:
switchId:
switchWwn:
zoning:
switchBeacon:
blade1 Beacon:
blade2 Beacon:
blade4 Beacon:
Area Slot Port Media Speed State
=====================================
0
1
2
3
4
5
6
(output truncated)
See Also supportFtp, supportSave, supportShowCfgDisable, supportShowCfgEnable,
supportShowCfgShow, traceDump, traceFtp,
2-660
Specify the range of ports to display. If the slotnumber/portnumber parameter is
omitted, all ports in the switch display in the per-port outputs. The
slotnumber must be provided when specifying a range of ports on multi-bladed
products.
Specifies the number of lines of
parameter used, the slotnumber/portnumber parameter is required.
2.4.19
v4.1.0
Fri Jan 10 01:06:10 2003
Thu Jan 17 00:06:52 2003
3.2.1
up 3:25, 1 user, load average: 1.55, 1.20, 1.11
Ulysses2
10.1
Online
Native
Principal
1
fffc01
10:00:00:60:69:80:03:0c
OFF
OFF
OFF
OFF
OFF
1 0 id N2 Online
1 1 id N2 Online
1 2 id N2 Online
1 3 id N2 Online
1 4 id N2 Online
1 5 id N2 Online
1 6 id N2 Online
portLogDump output to display. If this
Loopback->Slot 1 Port
Loopback->Slot 1 Port
Loopback->Slot 1 Port
Loopback->Slot 1 Port
Loopback->Slot 1 Port
Loopback->Slot 1 Port
Loopback->Slot 1 Port
traceTrig
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
0
1
2
3
4
5
6