Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 466

Note: Enter commands in lowercase only; mixed case is for readability.
2
portBufferShow
Operands
The operands are as follows:
slotnumber
portnumber
Examples
To display the long distance information a port:
switch:user> portbuffershow 17
User
Port
----
16
17
18
19
See Also
portCfgLongDistance
2-432
For bladed systems only, specifies the slot number of the port group to display,
followed by a slash (/).
Specifies the number of a port associated with the port group to display, relative
to its slot for bladed systems. Use
operand is optional; if omitted, this command displays the long distance buffer
information for all the port groups of the switch. In the case where this command
displays information for all the port groups of the switch, a divider line displays
between the ports of each port group to assist in readability.
Port Lx Max/Resv Buffer Needed
Type Mode Buffers Usage
---- ---- ------- ------ ------- ---------- ---------
- -
E L1 - 54
- -
- -
switchShow
Link Remaining
Buffers Distance
0 - -
54 50km
0 - -
0 - -
for a list of valid ports. This
Buffers
54
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01