Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 330

Note: Enter commands in lowercase only; mixed case is for readability.
2
ipAddrSet
Examples
To set the IP address details for switch number 1 on a chassis-based system:
switch:admin> ipaddrset -sw 1
Ethernet IP Address [192.168.166.148]:
Ethernet Subnetmask [255.255.255.0]:
Fibre Channel IP Address [none]:
Fibre Channel Subnetmask [none]:
Committing configuration...Done.
OK.
See Also
To enable DHCP on a non-chassis-based system:
switch:admin>> ipaddrset
Ethernet IP Address [192.168.74.102]:
Ethernet Subnetmask [255.255.255.0]:
Fibre Channel IP Address [220.220.220.2]:
Fibre Channel Subnetmask [255.255.0.0]:
Gateway IP Address [192.168.74.1]:
DHCP [Off]: on
ipAddrShow
2-296 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01