Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 371

Note: Enter commands in lowercase only; mixed case is for readability.
Table 2-16
Field
options
lsId
advertiser
incarn
length
chksum
linkCnt
flags
LinkId
out port
rem port
cost
costCnt
type
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
domain
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
lsDbShow Display Fields (Continued)
Description
Always 0.
ID of this LSR. It is identical to the domain number.
ID (domain number) of the switch that originated this LSR.
Incarnation number of this LSR.
Total length, in bytes, of this LSR. Includes header and link state
information for all links.
Checksum of total LSR, with exception of lsAge field.
Number of links in this LSR. Each link represents a neighbor in
NB_ST_FULL state.
Always 0.
ID of this link. It is the domain number of the switch on the other
side of the link.
Port number on the local switch.
Port number of the port on the other side of the link.
Cost of this link. The default cost for a 1 Gbit/sec link is 1,000.
Always 0.
Always 1.
Specify the domain number of the LSR to be displayed. This operand is optional;
if omitted, the entire link state database is displayed.
2
lsDbShow
2-337