Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 716

Note: Enter commands in lowercase only; mixed case is for readability.
2
switchStatusPolicySet
Examples
To change the switch policies:
switch:admin> switchstatuspolicyset
To change the overall switch status policy parameters
The current overall switch status policy parameters:
Note that the value, 0, for a parameter, means that it is
NOT used in the calculation.
** In addition, if the range of settable values in the
** prompt is (0..0), the policy parameter is NOT applicable
** to the switch. Simply hit the Return key.
The minimum number of
Bad PowerSupplies contributing to
Bad PowerSupplies contributing to
Bad Temperatures contributing to
Bad Temperatures contributing to
Bad Fans contributing to
Bad Fans contributing to
Down
Down
Down CP contributing to
Down CP contributing to
Down Blade contributing to
Down Blade contributing to
Out of range Flash contributing to
Out of range Flash contributing to
MarginalPorts contributing to
MarginalPorts contributing to
(output truncated)
See Also switchStatusPolicyShow,
2-682
Down
----------------------------------
PowerSupplies 2
Temperatures 2
Fans 2
WWN 0
CP 0
Blade 0
Flash 0
MarginalPorts 2
FaultyPorts 2
MissingSFPs 0
WWN contributing to
WWN contributing to
switchStatusShow
Marginal
1
1
1
1
1
1
1
1
1
0
DOWN status: (0..4) [2]
MARGINAL status: (0..4) [1]
DOWN status: (0..6) [2]
MARGINAL status: (0..6) [1]
DOWN status: (0..3) [2]
MARGINAL status: (0..3) [1]
DOWN status: (0..2) [0]
MARGINAL status: (0..2) [1]
DOWN status: (0..2) [0]
MARGINAL status: (0..2) [1]
DOWN status: (0..4) [0]
MARGINAL status: (0..4) [1]
DOWN status: (0..1) [0]
MARGINAL status: (0..1) [1]
DOWN status: (0..64) [2]
MARGINAL status: (0..64) [1]
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01