Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 666

Note: Enter commands in lowercase only; mixed case is for readability.
2
snmpMibCapShow
Note
agtCfgDefault
configuration.
The values can be changed, if user download the configuration data through
All the new values successfully configured by
If SNMP MIB is disabled, then the corresponding traps are disabled. If any trap group is disabled then
the corresponding individual traps also are disabled.
The FE and SW MIBs always are accessible.
off these MIBs.
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands
none
Examples
To display the options for configuring the SNMP MIB capability:
switch:admin> snmpmibcapshow
FE-MIB: YES
SW-MIB: YES
FA-MIB: YES
FICON-MIB: NO
HA-MIB: YES
SW-TRAP: YES
FA-TRAP: NO
SW-EXTTRAP: NO
HA-TRAP: YES
See Also agtCfgDefault, agtCfgSet, agtCfgShow,
2-632
also resets the SNMP MIB and trap capability to default along with other SNMP agent
swFCPortScn: YES
swEventTrap: NO
swFabricWatchTrap: YES
swTrackChangesTrap: YES
fruStatusChanged: YES
cpStatusChanged: YES
fruHistoryTrap: NO
snmpMibCapSet command takes effect immediately.
snmpMibCapSet does not prompt the user to turn on or
snmpConfig
Fabric OS Command Reference Manual
configDownload command.
Publication Number: 53-1000240-01