Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 267

Note: Enter commands in lowercase only; mixed case is for readability.
To display the status of a firmware download on a SilkWorm director:
switch:admin> firmwaredownloadstatus
[1]: Mon Dec 19 18:40:19 2005
Slot 6 (CP1, active): Firmware is being downloaded to standby CP. This step may
take up to 30 minutes.
[2]: Mon Dec 19 18:46:18 2005
Slot 6 (CP1, active): Firmware has been downloaded successfully to Standby CP.
[3]: Mon Dec 19 18:46:25 2005
Slot 6 (CP1, active): Standby CP is going to reboot with new firmware.
[4]: Mon Dec 19 18:47:45 2005
Slot 6 (CP1, active): Standby CP booted successfully with new firmware.
[5]: Mon Dec 19 18:47:56 2005
Slot 8 (FR4-18i): Firmware is being downloaded to the blade. This step may take
up to 10 minutes.
[6]: Mon Dec 19 18:48:50 2005
Slot 5 (CP0, active): Forced failover succeeded. New Active CP is running new
firmware
[7]: Mon Dec 19 18:48:57 2005
Slot 5 (CP0, active): Firmware is being download to standby CP. This step may
take up to 30 minutes.
[8]: Mon Dec 19 18:49:28 2005
Slot 8 (FR4-18i): Firmware has been downloaded successfully. Blade is rebooting
with the new firmware.
[9]: Mon Dec 19 18:50:12 2005
Slot 8 (FR4-18i): Firmware commit has started on the blade. This may take up to
10 minutes.
[10]: Mon Dec 19 18:50:51 2005
Slot 8 (FR4-18i): The commit operation has completed successfully.
[11]: Mon Dec 19 18:55:39 2005
Slot 5 (CP0, active): Firmware has been downloaded successfully on Standby CP.
[12]: Mon Dec 19 18:55:46 2005
Slot 5 (CP0, active): Standby CP reboots.
[13]: Mon Dec 19 18:57:06 2005
Slot 5 (CP0, active): Standby CP booted successfully with new firmware.
[14]: Mon Dec 19 18:57:10 2005
Slot 5 (CP0, active): Firmware commit operation has started on both active and
standby CPs.
[15]: Mon Dec 19 19:01:38 2005
Slot 5 (CP0, active): Firmware commit operation has completed successfully on
active CP.
[16]: Mon Dec 19 19:01:39 2005
Slot 5 (CP0, active): Firmwaredownload command has completed successfully. Use
firmwareshow to verify the firmware versions.
See Also
firmwareCommit, firmwareDownload, firmwareRestore,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
firmwareDownloadStatus
firmwareShow
2
2-233