Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 57

Note: Enter commands in lowercase only; mixed case is for readability.
value is set to 0, implying that no swEventTrap is sent. Possible values are:
• 0
• 1
• 2
• 3
• 4
• 5
Refer to
The ACL check is as follows: there are six ACLs to restrict SNMP get/set/trap operations to hosts under
a host-subnet-area. Host-subnet-area is defined by comparing nonzero IP octets. For example, an ACL
of 192.168.64.0 enables access by any hosts that start with the specified octets. The connecting host is
enabled to set each host-subnet-area to be read-write or read-only. The highest privilege matched out of
six entries is given to the access. The ACL check is turned off when all six entries contain 0.0.0.0. The
default values of all six entries are 0.0.0.0.
Note
When secure mode is enabled, the access control list feature is incorporated into the WSNMP and
RSNMP security policies. Community strings can be changed on the primary FCS switch only and will
propagate changes across the fabric.
Operands none
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
none
critical
error
warning
informational
debug
errShow for related information.
2
agtCfgShow
2-23