Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 417

Note: Enter commands in lowercase only; mixed case is for readability.
--setdefault
--showall
Examples To display the current password configuration parameters:
switch:admin> passwdcfg --showall
passwdcfg.minlength: 8
passwdcfg.lowercase: 0
passwdcfg.uppercase: 0
passwdcfg.digits: 0
passwdcfg.punctuation: 0
passwdcfg.history: 1
passwdcfg.minpasswordage: 0
passwdcfg.maxpasswordage: 0
passwdcfg.warning: 0
passwdcfg.lockoutthreshold: 0
passwdcfg.lockoutduration: 30
passwdcfg.status: 0
To change the password configuration parameters:
switch:admin> passwdcfg --set -uppercase 2 -maxpasswordage 90
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
-maxpasswordage value
Specifies the maximum number of days that can elapse before a
password must be changed. This is the password expiration period.
-maxpasswordage can be set at 0 to 999. Setting this parameter to 0
disables password expiration. The default value is 0.
-warning value
Specifies the number of days prior to password expiration that a warning
of password expiration is displayed. -warning can be set at 0 to 999. The
default value to 0.
-lockoutthreshold value
Specifies the number of times a user can specify an incorrect password
during login before the account is locked. The number of failed login
attempts is counted from the last successful login. -lockoutthreshold can
be set at 0 to 999. Setting this parameter to 0 disables the lockout
mechanism. The default value is 0.
-lockoutduration value
Specifies the time, in minutes, after which a previously locked account
automatically unlocks. The -lockoutduration time elapses from the first
time the failed login attempts exceeds the -lockoutthreshold.
Subsequent failed login attempts during a lockout period do not further
extend the lockout period. -lockoutduration can be set at 0 to 99999.
Setting this parameter to 0 disables the lockout duration mechanism,
requiring an administrative action to unlock the account. The default
value is 30.
Resets all password policies to default values.
Displays all the password configuration parameters.
2
passwdCfg
2-383