Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 58

Note: Enter commands in lowercase only; mixed case is for readability.
2
agtCfgShow
Examples
To display SNMP agent configuration information:
switch:admin> agtcfgshow
Current SNMP Agent Configuration
See Also agtCfgDefault, agtCfgSet, snmpConfig,
SW_v5_x.mib, "Switch Management Information & Switch Enterprise Specific Trap",
RFC1157, "A Simple Network Management Protocol (SNMPv1)",
RFC1213, "Management information Base for Network Management of TCP/IP-based Internets: MIB-
II"
2-24
Customizable MIB-II system variables:
sysDescr = FC Switch
sysLocation = End User Premise
sysContact = Field Support.
authTraps = 1 (ON)
SNMPv1 community and trap recipient configuration:
Community 1: Secret C0de (rw)
Trap recipient: 192.168.1.51
Trap recipient Severity level: 4
Community 2: OrigEquipMfr (rw)
Trap recipient: 192.168.1.26
Trap recipient Severity level: 0
Community 3: private (rw)
No trap recipient configured yet
Community 4: public (ro)
No trap recipient configured yet
Community 5: common (ro)
No trap recipient configured yet
Community 6: FibreChannel (ro)
No trap recipient configured yet
SNMP access list configuration:
Entry 0: Access host subnet area 192.168.64.0 (rw)]
Entry 1: No access host configured yet
Entry 2: No access host configured yet
Entry 3: No access host configured yet
Entry 4: No access host configured yet
Entry 5: No access host configured yet
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01