Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 503

Note: Enter commands in lowercase only; mixed case is for readability.
Examples
To verify if packets can be sent to the destination IP address:
switch:admin> portcmd ping 4/ge0 -s 192.168.100.50 -d 192.168.100.40
Pinging 192.168.100.40 from ip interface 192.168.100.50 on 0/0 with 40 bytes of data
Reply from 192.168.100.40: bytes=40 rtt=0ms ttl=64
Reply from 192.168.100.40: bytes=40 rtt=0ms ttl=64
Reply from 192.168.100.40: bytes=40 rtt=0ms ttl=64
Reply from 192.168.100.40: bytes=40 rtt=0ms ttl=64
Ping Statistics for 192.168.100.40:
To set the path characteristic to source mode on the remote host:
switch:admin> portcmd ipperf 4/ge0 -s 192.168.100.50 -d 192.168.100.40 -S
ipperf to 192.168.100.40 from IP interface 192.168.100.50 on 4/0:3227
30s: BW:115.67MBps WBW(30s): 56.70MBps
See Also
portCfg,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
interface. This operand is optional.
Packets: Sent = 4, Received = 4, Loss = 0 (0 loss)
Min RTT = 0ms, Max RTT = 0ms Average = 0ms
portShow
Loss(%):0.0 Delay(ms):2 PMTU:1500
2
portCmd
2-469