Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 653

Note: Enter commands in lowercase only; mixed case is for readability.
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the status of all slots in the system:
switch:user> slotshow
Slot
---------------------------------
1
2
3
4
5
6
7
8
9
10
See Also bladeDisable, bladeEnable, chassisShow, slotPowerOff,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
The blade is present, powered on, and running the preboot power on self
tests).
• INITIALIZING
The blade is present, powered on, and initializing hardware components.
• ENABLED
The blade is on and enabled.
• ENABLED (User Ports Disabled)
The blade is on but the external ports are disabled using bladeDisable.
• DISABLED
The blade is powered on but disabled.
• FAULTY
The blade is faulty because an error was detected.
• UNKNOWN
The blade is inserted but its state cannot be determined.
Blade Type ID Status
SW BLADE 2 FAULTY
SW BLADE 2 DISABLED
SW BLADE 2 ENABLED
SW BLADE 2 DIAG RUNNING POST2
CP BLADE 1 ENABLED
CP BLADE 1 ENABLED
AP BLADE 24 LOADING
SW BLADE 2 DIAG RUNNING POST1
SW BLADE 2 INSERTED, NOT POWERED ON
UNKNOWN VACANT
(User Ports Disabled)
slotPowerOn
2
slotShow
2-619