Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 274

Note: Enter commands in lowercase only; mixed case is for readability.
2
fosConfig
•
•
•
--show
Note
The features shown here may not be supported on all platforms. If you attempt to enable a feature that
is not supported on your platform, an error message stating "Command not supported on this platform"
is displayed.
Examples
To display the status of the features:
switch:admin> fosconfig --show
FC Routing service:
iSCSI service:
iSNS Client service:
To disable the FC Routing service:
switch:admin> fosconfig --disable fcr
FC Routing service is disabled
To enable the FC Routing service:
switch:admin> fosconfig --enable fcr
FC Routing service is enabled
To enable the iSCSI service:
switch:admin> fosconfig --enable iscsi
iSCSI service is enabled
To disable the iSCSI service:
switch:admin> fosconfig --disable iscsi
iSCSI service is disabled
See Also
fcrConfigure, iscsiCfg, iscsiPortCfg, isnscCfg,
2-240
and try the command again.
"FC Routing service is already disabled" - This means that the FC Routing service is already
disabled.
Use switchShow
iSCSI
The iSCSI service will be disabled on this switch. This command can be run while the switch
state is "online".
iSNSC
The iSNSC service will be disabled on this switch. This command can be run while the switch
state is "online".
Displays the current operating status of features on the switch.
to display the current state of the FC Routing service.
enabled
enabled
disabled
switchShow
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01