Note: Enter commands in lowercase only; mixed case is for readability.
2
zoneCreate
When secure mode is enabled, this command can be issued only from the primary FCS switch.
Operands
The following operands are required:
"zonename"
"member"
Examples
To create three zones using a combination of port numbers and zone aliases:
sw5:admin> zonecreate "Red_zone", "1,0; loop1"
sw5:admin> zonecreate "Blue_zone", "1,1; array1; 1,2; array2"
sw5:admin> zonecreate "Green_zone", "1,0; loop1; 1,2; array2"
See Also
zoneAdd, zoneDelete, zoneRemove,
2-736
Name for a zone to be created, in quotation marks. Quotation marks are optional.
This name cannot be used for any other zone object. Zone names are limited to 64
characters.
List of members to be included in zone, in quotation marks, separated by
semicolons. Quotation marks are required. Can be one or more of the following:
•
A switch domain and port area number pair: for example, "2, 20". View the
area numbers for ports using the
•
World Wide Names.
•
QuickLoop AL_PAs.
•
Zone alias names.
zoneShow
switchShow
command.
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01