Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 560

Note: Enter commands in lowercase only; mixed case is for readability.
2
portStatsShow
er_zone_discard
er_crc_good_eof
er_inv_arb
open
transfer
opened
starve_stop
fl_tenancy
nl_tenancy
zero_tenancy
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands
This command has the following operands:
slotnumber
[ge]portnumber
ge
ip
fcip
2-526
Class 3 frames discarded due to zone mismatch.
CRC error with good EOF (platform and port specific).
Invalid ARB.
Number of times the FL_Port entered OPEN state.
Number of times the FL_Port entered TRANSFER state.
Number of times the FL_Port entered OPENED state.
Loop tenancies stopped due to starvation.
Number of times FL_Port had loop tenancy.
Number of times NL_Port had loop tenancy.
Number of times zero tenancy occurred.
For bladed systems only, specifies the slot number of the port to be displayed,
followed by a slash (/).
Specifies a port number to be configured, relative to its slot for bladed systems.
Specify the optional ge option to display the GbE port hardware statistics. Use
switchShow to display a list of valid ports.
Displays the GbE statistics.
Displays all the GbE port statistics related to IP addresses that are on (not zero).
Optionally, use ipaddress to display statistics for the specified IP address.
Displays the GbE statistics on all FCIP tunnels. Optionally, use tunnelnumber to
display statistics for the specified FCIP tunnel.
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01