Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 256

Note: Enter commands in lowercase only; mixed case is for readability.
2
ficonShow
Registered Node WWN
Registered Port WWN
Sequence Number
Serial Number
Switch node WWN
Switch Port WWN
Switch WWN
Tag
TS Format
Time Stamp
Type
Type Number
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
database
fabric
2-222
• Protocol
Displays whether the traffic is using FICON or FCP.
Displays the device's node World Wide Name associated with the device HBA.
Displays the device's channel or storage CU port World Wide Name associated
with the device HBA.
Displays the sequence number of the self describing node.
Displays the switch serial number.
Displays the switch node World Wide Name.
Displays the switch port World Wide Name.
Displays the switch WWN.
Displays the physical identifier for the self-describing node interface.
Displays the Time Server format.
Displays the timestamp, expressed in date format.
Same as Port Type.
Displays the type number of the self describing node. It also describes the machine
type.
Specify the database to display. Valid values are:
• RNID
• LIRR
• SwitchRNID
• RLIR
• ILIR
This operand is required.
Specify fabric to display both local and remote information; if omitted, only
members of the named database that are local to the switch on which the command
is issued displays.
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01